Regular CC3 - January 2023 (06.01.2023)
NOTE: To prevent bugs, perform a factory reset before upgrading.
Settings - User - Backup/Reset - 168 - Clear All Data
1. The problem was solved with the fact that the latest version of the YANDEX navigator was not displayed in picture-in-picture mode after launch, but could only be displayed after opening in full-screen mode. The new version supports direct image-in-picture mode.
2. Some problems in displaying the picture-in-picture mode caused by voice control commands have been resolved.
3. A voltage display has been added to the status bar. At the same time, please note that the voltage display cannot be a fully accurate value and is used only as reference information." General settings" -- "Voltage display".
4. Added the function of delaying going to sleep after turning off the car.
"General settings" -- "Delayed shutdown" (last item).
5. The display of news and exchange rates for Russian-speaking regions has been added to the black and white interface mode.
6. For the main CC3 interface, the function of sliding left and right has been added. By clicking on the screen to the side, you can go to the next page, as well as customise and add widgets of third-party applications.
7. According to user needs, the TEYES RADIO playback algorithm has been changed when there is no network connection: when loading the next channel, you need to return to the current channel load. Update the application version number to 2.2.
8. Added the function of displaying the external temperature in the status bar obtained via CANBUS. This function only works if CANBUS is able to obtain data on the outdoor temperature.
NOTE: 1 report of reverse image not showing when in reverse but live view functioning. Reinstall this firmware to rectify.
- Copy these files directly to the main directory of a blank USB stick (FAT32)
- Plug it into the USB slot of the CC3
- After a few seconds the prompt asks if you want install
- Press OK